Gear bearing cleaning ability

The calculation of gear bearings, etc. is a gear and bearing calculator that supports a wide range of types, simple operation, high efficiency and stability, and is very practical. The calculation of gear bearings and the like can help the user to complete calculations such as cylindrical gear calculation and radial bearing strength calculation. It is a software developed specifically for bearing design. Friends in need can download and see.

Main performance of gear bearings:

1. It has strong cleaning ability and can quickly remove dust, iron powder, dirt, oil and other dirt on the surface of mechanical parts.

2. The volatilization speed is moderate, leaving no residue after volatilization.

3. Safe and reliable, non-corrosive and does not affect the various properties of mechanical parts. No olefins, gasoline ignition hazard.

4. It is easy to use and uses a special spray gun to clean the mechanical parts without all the disassembly.

Precautions for the use of gear bearings:

1. Keep the bearings and their surroundings clean during installation.

Even small dust that is invisible to the eyes can have a bad effect on the bearings. Therefore, keep the area clean so that the dust does not intrude into the bearing.

2. Use with caution.

In the use of the gear bearing strong impact, it will produce scratches and indentations, which is the cause of the accident. In severe cases, it will crack and break, so you must pay attention.

3. Use the appropriate operating tools.

Avoid using existing tools instead and use the right tools.

4. Pay attention to the corrosion of the gear bearing.

When installing a gear bearing, the sweat on your hand can cause rust. Be careful to use a clean hand to operate, and try to wear gloves as much as possible.

In order to maintain the original performance of the bearing in a good condition for as long as possible, it is necessary to maintain, repair, and prevent accidents, ensure the reliability of operation, and improve productivity and economy.

The maintenance standard of the mechanical operation conditions is carried out on a regular basis. The contents include inspections for monitoring the operational status and periodic disassembly.

As a maintenance item during operation, there are rotation sounds of gear bearings , vibration, temperature, state of lubricant, and the like.