Best Ultrasonic Cleaner,Teeth Cleaning Machine,Portable Ultrasonic Cleaner,Veterinary Ultrasonic Cleaner ZHEJIANG FOMOS MEDICAL TECHNOLOGY CO.,LTD. , https://www.ifomos.com
The super constant temperature water bath uses 220V AC power supply. Before use, make sure that the rated current of the power socket is not less than 6A, and have a safety grounding device. When using, the working room should be connected to the grounding device. When adding water, please pay attention to the upper cover plate not less than 8cm. The super-constant water bath pot body should be soft water. For example, use distilled water. Do not use hard water such as well water, river water or spring water to prevent the heating tube from bursting and affecting the sensitivity of the constant temperature. Please note that the instrument socket is inserted first and then the power socket is inserted. Turn on the power, turn on the circulating water pump, and then turn the setting measurement switch of the constant temperature part to the required temperature (digital display). The power supply enters the ON indication. At this time, the instrument is already heating. When the temperature control indication is turned OFF, the water temperature of the water tank has been When the set temperature is reached, when the water temperature drops, the indicator enters the heating ON state "automatic temperature control". To quickly lower the working room temperature, please turn off or adjust the digital display temperature index. The external latex tube is connected to the cold water or the tap water condensate nozzle at one end, and the other end is connected to the pool with a latex tube for circulating cooling. The water in the water tank It will condense quickly.
Precautions for super constant temperature water bath 1. Please read the instructions carefully before use. Close the water nozzle. Remember to add water to the water line first, then turn on the power.
2. Set the digital display temperature, turn on the power switch to warm the water tank, cover the water tank cover, wait for the water temperature to rise to the required temperature value, turn on the circulating power switch, and the water in the water tank is circulating indoor temperature.
3. The water level should not be too high to prevent the water from overflowing and causing experimental errors.
4. When cooling rapidly, there are two water nozzles next to the control box. Any one enters the condensed water (ice water or tap water), and the other enters the water outlet (with latex tube) to help lower the temperature.
5, in order to extend the life of the instrument, please be careful not to damp the control box to prevent leakage.
6. At the end of use, please put the water (outlet) clean, wipe it with a dry cloth, and put it in a dry and ventilated place.
Super constant temperature water bath use method and precautions
Super constant temperature water bath use: