Kelp is rich in nutritions and multipl minerals.It make people full but diets. It is the most favorite choice of people with hypertension, hyperlipemia, hyperglycemia.
Extract from the natural plant of Laminaria Japonica which is light grey powder after the special extract processing.They are powder form with good color. It's mainly used for Medicine, cosmetic, food additive field as raw materials.It's very good for human health.
Kelp has anti-can-cer and anti-virus properties related to its antioxidant content and its ability to stimulate your immune system
Kelp Alginate Oligosaccharide,Alginate Oligosaccharide,Seaweed Extract,Kelp Extract For Plants Shandong Haizhibao Ocean Science and Technology Co.,Ltd. , https://www.haizhibaoseafood.com
The outer shell of the box is welded by thin steel plate. The inner and outer layers of the water tank are made of copper. The insulating layer is filled with glass wool and has good thermal insulation performance. The external hammer paint and parts are chrome-plated.
The incubator is equipped with a double door, and the inner door is closed with a glass door to facilitate the observation of the test object. Electrical parts are placed in the space on the left side of the box for easy access and replacement of parts.
In the constant temperature incubator, the temperature automatic control element is coiled into a spiral shape by a bimetal piece, which is inserted into the box and is provided with a protection tube. Its sensitivity is 0.5 ° C, in the range of 20-60 ° C. The incubator is heated or thermostated with red and green indicators.
(1) Instructions for use of water-blocking electrothermal constant temperature culture 1. When the test item is placed in the incubator, close the glass door and the outer door, and unscrew the top flap on the top of the box.
2. Before the electric heating is not applied, water must be added first. When adding water, the funnel is inserted into the water supply pipe and added to the buoy indication.
3. When in use, the sensor probe should prevent contact with hard objects and impact the sensor probe to avoid damage.
4. Turn on the power and turn on the power switch.
5. Temperature setting: push the setting, measure the button switch, rotate the setting button, set the desired temperature value, set the setting, and then click the setting and measure button switch to make it extend, it will display the inside of the box. measure temperature.
6. Please refer to the temperature controller manual for detailed instructions of the temperature controller.
(2) Precautions for the water-proof incubator 1. The working voltage is 220V, 50HZ.
2. When using the power, avoid touching the electrical parts in the space on the left side of the box, or wipe it with a damp cloth and water.
3. The power cord must not be wrapped around metal objects or placed in a damp place. Rubber aging and leakage must be prevented.
4. The test object should not be over-squeezed in the box, so that the air flow is smooth, and the average temperature inside the box is kept.
5. After each use, the power should be turned off, and the drain tap installed in the lower right side should be turned into a clean water. When the second time is used, warm water should be added.
Shanghai Hu Yueming blast drying oven, vacuum drying oven, biochemical incubator, constant temperature incubator, test chamber, constant temperature shaker, water tank, water bath and other laboratory equipment.
Waterproof electric heating constant temperature incubator GNP-9050BS-III use and description
Water-proof electrothermal constant temperature incubator Instructions and precautions The water-blocking electrothermal incubator uses the water in the water tank. After electric heating, it is conducted to the inner chamber to raise the temperature of the box, so the box is indirectly heated, and the temperature rises and falls. Compared with the direct type, the air is heated slowly, which is very suitable for bacterial culture and the like.