In recent years, the demonstration of farmland has proved that insecticidal lamps have certain promotion value. According to the survey, more and more cotton farmers, fruit farmers, vegetable farmers, and grain farmers in Aksu City have made insecticidal lamp insecticides the first choice. In order to fully utilize the efficacy of insecticidal lamps and extend the service life, the following measures are recommended. 1 Reasonable insecticidal lamps in the field should be used in large areas. According to the crop cultivation layout, the selected insecticidal lamp model, and the trapping range, the area of ​​the object used in addition to the single-light trapping range, the number of lamps to be installed in the crop plot is obtained, and the actual installation should be slightly more than the calculation number. The effect of installing the insecticidal lamp in a piece is obviously better than that of the scattered and separately installed, and the field with less light source (dark) is better than the field with more light (light). Therefore, it is more ideal to use the insecticidal lamp lamp to calculate and install from the radius (effective trap radius). Generally, a pest control lamp can control 60~100 (666.7m2) farmland. 2 Installation height Suitable for insecticidal lamp installation height should consider the crop type and cultivation method. Low-lying vegetables such as green vegetables and cabbage, the insecticidal lamp installation height is less than 1.0 m; the scaffolding vegetables such as cowpea and green beans, the installation height is 1.0~1.2 m; the fruit tree insecticidal lamp is installed at a height higher than the canopy 0.3 m; It is advisable to install the insecticidal lamp at a height of about 1.5 m. 3 Retracting time properly According to the time and regularity of pest occurrence in Aksu City, the lamp will be hung from the end of March, and the light should be closed in the end of September. The insecticidal effect is good and the control effect is high. 4 Reasonable adjustment of light wave length There are many types of crop pests, and the requirements for light waves are different. Therefore, the light wave length of insecticidal lamps should be adjusted according to the main pests of different crops to achieve the most satisfactory insecticidal effect. 5 In time to remove the pests and insecticidal lamps in the bag, clean the insect bag once every 2~3 days, and clean it once a week. When cleaning, the insects must be killed to avoid hidden dangers. The trapped adults can be used as feed for chickens and ducks, or they can be buried in orchards for fertilizer. 6 Keep the insecticidal lamp high-voltage power grid and lamp cleaning timing Brush the insects on the power grid and the lamp tube to clean the grid and the lamp tube, and improve the insecticidal lamp to trap the pests. It is usually cleaned once every 7 days, and the peak period of pests must be cleaned once every 2~3 days. 7 Prevention and control (1) The pests in the farmland are basically evenly distributed. After installing the insecticidal lamp, a large number of adult insects will be attracted. Therefore, there will be an increase in the number of adults in the place where the insecticidal lamp has a radius of 15 m, and the number of traps is far lower. The number of temptations, the pests that have not been killed, mate and lay off the offspring, and some pests can not be killed in the place where the insecticidal lamps are installed, causing the local pests to multiply. Therefore, in the range of 20 m in the radius of the lamp, the insects should be kept at the peak of the adult. (2) During the process of turning on the light, try to avoid the beneficial insect activity time, so as to avoid accidentally killing beneficial insects. (3) Most of the pests have phototaxis. They are sensitive to light. In the dark, they like to be close to bright places. The insecticidal lamp is designed according to this principle. Its main components are the frequency vibration tube and the high voltage power grid. The frequency-vibrating lamp can generate light waves of a specific frequency, attracting pests to approach, and the high-voltage power grid is wrapped around the lamp tube to kill or stun the flying pests to achieve the purpose of controlling pests. (4) In the process of management, cleaning and collection of insecticidal lamps, the power must be turned off before operation, to prevent live operation and safety.
Different from absorbing the medicine through intestine, with Infusion and Injection ,medicine is more quickly integrated into the blood stream, thus allowing it to work faster and more focused. Injections and infusions are strictly carried out with disposable products, so as to avoid cross contamination and prevent infectious transfers. The application of injections can take place in a variety of manners. However, most involve subcutaneous, intramuscular or intravenous methods.
In the Infusions/Injections category, Yingmed offers you everything you need for injection and infusion procedures: Syringe , Cannula, Disposable Infusion set, Infusion Stand.
In order to avoid infection,some disinfection products must be used before or after puncture, such as Cotton swab,Povidone-idoine swabstick , Cotton ball, Alcohol pre pad, Povidone-idoine prep pad , Non-woven surgical tapes, Infusion plaster, IV cannula dressing, Alcohol prep pad and ect. You will find these items in the category of Yingmed Wound Dressing.
Or, you can directly contact with Yingmed customer service for the details.
Sterile Insulin Injector,Single-Use Insulin Syringe,Infusion Set Medical,Parts Of Infusion Set,Disposable Syringe,IV Cannula With Injection Port,Infusion Set NINGBO YINGMED MEDICAL INSTRUMENTS CO.,LTD , https://www.chinayingmed.com
Cotton Swab
Infusion plaster
IV cannula dressing
Non woven surgical tape