Precautions when using the float tube Frozen Squid Semi-Finished Products Squid Cut Flower,Squid Sashimi,Squid T+T,Squid T+R,Squid Wings,IQF Squid Products,Squid Semi-Finished Products Zhejiang Industrial Group Co., Ltd. , https://www.xingyeseafood.com
l Check whether the product is damaged during transportation, storage and storage; whether the fasteners are loose or loose.
l Check if there is oil in the submersible motor oil room and the oil quality is good.
l The power of the machine is: voltage 380±5%, frequency 50±1%HZ. Before each power-on, check whether the power supply unit is safe and reliable, whether the voltage and frequency meet the requirements, and whether the grounding device has obvious signs.
l The power supply lead-in cable should be equipped with a four-core YZW rubber sheathed flexible cable. It is equipped with a 15-meter YCW heavy-duty rubber cable. If the demander has special requirements, the cable length can be supplied according to the contract. It is not allowed to immerse the cable connector or head in water or get wet.
l This equipment should not be used in flammable or explosive places, nor in highly corrosive media and flammable liquids. LHJ1800 vertical circulating mixer pontoon pusher selection quotation
l Check the insulation of the motor and control cabinet before use. The insulation resistance value of the motor and control cabinet to the ground should be greater than 50 megohms, otherwise it should be treated for flooding; when the insulation resistance value is less than 2 megohms, it must be disassembled for maintenance. In this case, check the power cable first, then check the cable wiring cavity. After ***, check the motor windings. Also check that the grounding of the motor is secure before use. LHJ1800 vertical circulating mixer pontoon pusher selection quotation
l The lead-out cable of the submersible motor must be strictly sealed. Check whether the cable is broken or broken before entering the water. The inlet seal of the cable is intact. If any leaks and leaks are found, they should be disposed of in time. It is strictly forbidden to use the cable as a sling to prevent accidents.
l The rotation direction of the device during normal operation is counterclockwise from the direction of the water inlet. If there is a reversal, just adjust any two cables of the three cables to the wiring position.
l This equipment is equipped with a special control cabinet, which can display alarms for over-temperature, oil leakage, overload, phase loss and short circuit of the submersible motor, and implement shutdown protection according to the fault condition. If the above fault is displayed on the control cabinet during operation, it should be repaired in time. Please choose our control cabinet when purchasing this equipment to effectively protect the equipment.
l The impeller of this equipment has a limited particle size. The plastic bag, metal wire, wood rod and other debris should be avoided in the pool to prevent the impeller from winding and causing malfunction.
l Always observe whether the equipment is running smoothly during use; whether there is mechanical friction and other sounds; whether the current value changes. If problems are found, they should be resolved in time. 