Video Doorbell,Intercom Video Doorbell,Sd Card Video Doorbell,Camera Doorbell Shenzhen Zuomi Technology Co., Ltd. , https://www.zuomicamera.com
What do you need to know when using a half saw?
劈Half saws are now available in many domestic slaughterhouses. For this type of equipment, if you want to maintain a better working condition and longevity, you should do the work before using it. Let's take a look at what you need to do to work before you use it.
Before the slaughtering operation, it is necessary to prepare the work, check whether the semi-saw drive system, the saw blade and its fasteners are loose, check whether the motor, mechanical transmission system and pneumatic system are normal, check the semi-saw control valves and electromagnetic induction system. Whether it is sensitive, check whether the cooling water pipe, oil hole, etc. are unobstructed, check whether the saw blade, the running direction of the saw blade and the guiding mechanism are normal, and if problems are found, deal with them in time.
After the preparation is completed, start the equipment for 5 to 10 minutes, and the half saw ensures that the equipment can be put into normal operation. During the operation, it should be operated by professionals. It should be ensured that the saw blade is vertically downward when the belt is used, and the saw blade cannot be tilted, and the speed of the knife, the saw running speed and the equipment transmission speed cannot be adjusted at will. All adjustments and maintenance work are prohibited during equipment operation. If there is a fault or need to be adjusted, press the emergency brake button, turn off the power, and stop the conveyor system related to the equipment. In addition, the operator in addition to operating in accordance with the procedures, split half saw Note also that the handheld split half saw not too much force in the course of their work, so as not to overload blade damage.
劈 After the semi-saw equipment is used, it is necessary to confirm that the conveyor line related to the equipment has been completed before it can be stopped, and check the electric, gas and water source switches to ensure that all are closed.
Users who have applications for related equipment may have an understanding, no matter what product we use, we need to use and operate correctly, which can ensure the personal safety of the operator and extend the service life of the equipment itself. So what do we need to know when we use the 劈 half saw?
劈Half saw operation procedure
1. If the lifting table is used, the operator can keep the half saw in a horizontal position during the second half. Please do not use the pressure on the half saw. Instead, the half saw should be pulled.
2. Use a knife to mark the center of the spine.
3, start the 劈 half saw.
4. Saw into the tailbone between the legs.
5. The driven wheel (front end) of the 劈 half saw should point upwards.
6. When the tailbone collides with the half-saw beam, keep the saw until the tailbone cracks. After the tailbone cracks, the half saw can continue down the direction of the pig's spine.
7. After the pig's tailbone and hip bones are opened, the saw passes through the waist of the pig carcass.
8. The half saw should be in a horizontal position.
9. Do not apply pressure to the 劈 half saw to guide the 劈 half saw to ensure straight cut.
10. Saw the shoulders and neck of the carcass.
11. When sawing the shoulders and neck, the driven wheel (front end) of the half saw should point downward.