The basic knowledge of low-speed centrifuges has been well understood, so do you understand the characteristics of low-speed centrifuges and the precautions in the installation process? Let me introduce you to the characteristics and installation precautions of the low-speed centrifuge. The inverter can be started, the starting is stable, the separation factor is adjustable; the non-contact type energy-consuming braking system; the anti-static belt transmission; the closed structure of the body; the sealing member is made of silicone rubber or fluorine rubber. It can meet the requirements of closed explosion protection and is suitable for applications in toxic and flammable and explosive places. Low speed centrifuge features 1. Configure the nitrogen protection system to ensure that the inner chamber of the centrifuge is not isolated from the outside air. 2. Strong versatility and wide application range. It can be used for the separation of solid phase granular suspension or for the separation of fibrous materials. 3, the shell flip, set the feeding tube, washing tube, observation mirror, lighting hole. 4. Configure the online cleaning system (spraying system) to clean the visible parts inside the centrifuge, such as the inner wall of the centrifuge casing, the inner and outer surfaces of the drum, and the surface of the sump, to ensure the cleanliness requirements and meet the GMP standards. 6, the inverter can be started, the start is stable, the separation factor is adjustable; the non-contact type energy consumption braking system; the anti-static belt transmission; the closed structure of the body; the sealing member is made of silicone rubber or fluororubber. It can meet the requirements of closed explosion protection and is suitable for applications in toxic and flammable and explosive places. Installation precautions for low speed centrifuges (1) The ground is firm and level, preventing the freezing low-speed centrifuge from vibrating or moving the instrument during operation. (2) Adjust the left and right foot screws to ensure the level of the frozen low speed centrifuge. (3) With independent ground wire, it is strictly forbidden to share the zero wire and the ground wire to prevent electric shock and injury. (4) There should be no corrosive gas and electromagnetic field interference around the frozen low-speed centrifuge to prevent premature failure of the external protective layer of the instrument and interference with electrical components.
The anesthetic mask can be attached to the patient's face, delivering oxygen and volatile anesthetic gas to the patient.
Oxygen Masks are devices that are constructed to supply oxygen or other gases to an individual. Masks of this type fit snugly over the nose and mouth, and are equipped with a tube that connects the Oxygen Mask to a storage tank where the oxygen is contained. The Oxygen Mask is made from PVC, as they are light in weight, they are more comfortable than some other masks, increasing patient acceptance.
The Nebulizers are connected by tubing to a compressor, that causes compressed air or oxygen to blast at high velocity through a liquid medicine to turn it into an aerosol, which is then inhaled by the patient, and the medicine in the form of a liquid solution is loaded into the device upon use. The Nebulizers are commonly used for patients in hospitals who have difficulty using inhalers, such as in serious cases of respiratory disease, or severe asthma attacks, it is also for ease of use with young children or the elderly.
Medical Face Mask,Disposable Face Mask,Surgical Face Mask,Medical Face Mask Hangzhou Trifanz Medical Device Co., Ltd , https://www.cfzmeds.com
5, the structure is simple, easy to operate and maintain.